3m Oil Industry Lathe Large Diameter Heavy Duty Horizontal Oil Country Lathe

• After-sales Service: 1
• Warranty: 1
• Type: Horizontal Lathe
• Processing Accessory: Chuck CNC Lathe
• Guide Rail: Horizontal Guide Rail
• Tool Holder: Single-tool Holder CNC Lathe
• Model NO.: Q1327A-3m
• Power Source: Hydraulic Pressure
• Controlling Mode: Artificial
• Automatic Grade: Manual
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: CE
• Condition: New
• Transport Package: Packing in Seaworthy Wooden Cases
• Specification: Dimension(L*W*H): 4400/2080/1950mm
• Trademark: DRC
• Origin: China
• Production Capacity: 500

Product Description

3m Oil Industry lathe Large Diameter Heavy Duty Horizontal Oil Country Lathe

Pipe Threading Lathe Introduction:
Pipe Threading Lathe is mainly designed for internal and external pipe threads including metric,inch,module,DP and tape threads, as well as all the common function of normal lathe such as processing the inner bore and end face of shafts and disks. This series lathe machine is widely used in industries including petroleum exploiting, minerals mining, chemical piping and geological prospecting, it is high efficiency equipment in processing and repairing drilling pipe, drilling rod, thread coupling and so on.
Oil Industry lathe Features:
1.Big spindle bore and double chuck to ensure process big diameter pipe
2.One-piece bed adopts high strength iron to ensure rigidity and precision
3.Ultrasonic frequency quenched guide-ways ensure good wear-resistance
4.Carriage and guide way contact surface use Turcite B to maintain accuracy

Main Techinical specifications	Unit	Q1327A
Swing over bed	mm	800
Swing over carriage	mm	540
Tube outside diameter		100-275
Max length of workpiece	mm	1500  3000  5000  6000
Max length of turning	mm	1350  2850  4850  5850
Span of guideway	mm	550
Max load of Lathe bed	KG	3000
Quenching hardness		≤HRC55
Spindle bore(dia)	mm	280
Mode of spindle speed		2
Range of spindle speed	r/min	10-300
Power of main motor		15
Motor frequency converter		15
Size of chuck		800/4 jaw
Transverse feed range	r/min	0.05~0.75/32
Longitudinal feed range		0.1-1.5/32
Screw pitch of leadscrew	mm	12
Noand range of metric thread	mm	1-15/23
No and range of inch thread		2-28/22
Rapid traverse speed	mm/min	4000
Section of tool shank	mm	32
Dia /Travel of tailstock quil	mm	140/300
Taper hole of tailstock quill		Morse 6
Maximum taper of thread		1:04
I Max taper machining length	mm	700
Length ( L)	mm	4400
Width(W/H)	mm	2080/1950
Machine weight (1500mm)	KG	7500

 

What Is DRC's  Conventional Lathe ?

 

Q13 series pipe thread lathe is specially developed by our company for the processing of AP pipe threads in the oilfield industry.The machine tool has a large spindle through-hole and a double chuck clamping structure on the front and back.It is suitable for all kinds of long pipe cylindrical threads, tapered threads and Turning of special threads.At the same time, it also has all the functions of ordinary CNC lathes. It can replace ordinary CNC lathes to process complex shaped shafts, sleeves, disks and other parts, such as turning inner and outer cylindrical surfaces, conical surfaces, arc surfaces, end faces , Grooving, chamfering, threading, etc., strong process adaptability, high processing efficiency, uniform product. This machine tool has a novel appearance, simple operation, mature structure and stable performance, and is widely used in petroleum, natural gas, chemical, hydropower, and geological exploration departments.
Structural features of pipe thread lathe:
1. The bed is made of high standard cast iron (HT300) secondary molding and casting. After secondary aging treatment, it has strong stability, good rigidity and strong seismic resistance.
2. The guide rail surface is subjected to high-frequency quenching (Rockwell hardness can reach HRC55 or higher). The imported guide rail grinder is used for precision grinding to ensure long life, high accuracy and good retention of the guide rail surface.
3.3 The headstock box of the 3 spindle is completed by one-time molding of the imported horizontal boring and milling machining center. The spindle has high concentricity, strong structural rigidity, and can adapt to heavy cutting. Stable, both recutting and finishing.
4. Automatic forced circulation lubrication makes the transmission system run flexibly and can effectively cool down. Each sliding rail pair is coated with TSF soft belt, which greatly reduces the friction coefficient and improves the service life of the rail.
5. Equipped with a four-station electric tool post as standard, quick and easy tool change.