German 6 Axis Torno CNC Fanuc Automatic Slanting Bed Hydraulic Power Metal Precision Turning CNC Lathe Machine

• Type: Turret Lathe
• Processing Accessory: Chuck CNC Lathe
• Guide Rail: Inclined Guide Rail
• Tool Holder: Single-tool Holder CNC Lathe
• Power Source: Hydraulic Pressure
• Controlling Mode: CNC
• Model NO.: HT316
• Automatic Grade: Automatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: CE
• Condition: New
• Transport Package: Packing in Seaworthy Wooden Cases
• Specification: Dimension(L*W*H): 3850 *1850 *1800 mm
• Trademark: DRC
• Origin: China
• Production Capacity: 500

Product Description

German 6 Axis Torno Cnc Fanuc Automatic Slanting Bed Hydraulic Power Metal Precision Turning Cnc Lathe Machine

HT 3 Universal Turning Machine Description:

HT3 CNC lathe is a two-axis linkage, fully closed-loop CNC machine tool. The machine machine-electric-hydraulic integrated layout adopts a fully enclosed protective cover, the door opens to the left, and the operating table is located on the right end of the fixed protective cover for easy operation. Each servo feed shaft adopts high-speed silent ball screw, elastic coupling is directly connected, fast moving speed, low noise, high positioning accuracy and repeated positioning accuracy; the servo motor is equipped with an absolute value encoder, no cumulative error, no memory, No need to find a reference point, the position information will not be lost after the power is cut off. The machine tool has strong functions, high precision, reasonable layout, beautiful appearance, easy operation and convenient maintenance.

 

Overall: 

The machine tool has a mechanical, electrical, and hydraulic integrated layout. The 45° overall slant bed has the advantages of compact structure, high rigidity, smooth chip removal, and convenient operation. The guide rail type is a rolling guide rail, and the driving parts are high-speed silent ball screws.  It has the advantages of fast speed, less heat, and high positioning accuracy; the machine tool is fully enclosed protection, automatic chip removal, automatic lubrication, automatic cooling.

Spindle: 

The main drive unit of this machine tool is driven by Japanese FANUC 7.5/11kw high-performance servo motor, which drives the spindle to rotate through a pair of pulleys. The spindle speed range is 30-4500r/min. The front support of the main shaft adopts three-set high-precision angular contact ball bearings, and the rear support adopts two high-precision angular contact ball bearings with large apertures to meet the bearing requirements of axial and radial cutting forces.

Tailstock:

The hydraulic cylinder is used to drive the integral mobile tailstock. The structure is simple, with high precision, high rigidity and reliable performance.

Turret:

The machine used servo hydraulic turret, with fast tool change speed and high reliability.

Drive:

The X-axis and Z-axis driving adopts FANUC high-performance servo motor, with high positioning accuracy and flexible and reliable action.

System:

The control system is FANUC 0iTF+, using high-performance AC spindle motor and servo motor.

Parameter
Spindle head	Type	FL 140 h5 / A2-6
Spindle maximum speed	rpm	5000
Max. Torque	N×m	90
Spindle power	kW	7.5-11
Chuck diameter	mm	210
Spindle bore	mm	74
Front bearing diameter	mm	100
Spindle bearing lubrication	Type	Grease
Linear motion lubrication	Type	Oil
Speed range	rpm	5-5000
Work area
Maximum swing over bed	mm	558
Maximum cutting diameter	mm	340
Maximum cutting length	mm	350
Maximum bar capacity	mm	51
Travel Z	mm	380
Travel X	mm	180
Ball screw
X/Z axis ballscrew DxP	mm	32 x 10
Feed
Rapid traverse Z	m/min	30
Rapid traverse X	m/min	30
Feed force of axis
Feed force X/Z	N	4500
Number of axis		2
Measuring system
X/Z axis measuring system		Absolute rotative
(X / Z);VDI/DGQ 3441 Positioning	mm	0.008/0.008
(X/ Z);VDI/DGQ 3441 Repeatability	mm	0.004/0.005
Tailstock
Travel of tailstock	mm	350
Tailstock moving type		Hydraulic
Max. pressure of tailstock	N	4000
Centre location	Type	MT 4
Servo turret
No.of tool stations	-	8
Turret disk type	-	Slot disk
Tool attachment	mm	25,40
Electrical specifications
Voltage	V	380 ±10%
Frequency	Hz	50 ± 1%
Max. installed power	KVA	20
400v lie protection fuses	A	63
400v line automatic circuit breaker	A	33
Connection cables section	mm2	4 x 10
Hydraulic unit
Max. working pressure	bar	45
Reservoir capacity	l	35
Pump flow	I/ min	24
Coolant system
Capacity with tank	l	150
Pump delivery	l /min	30
Pump pressure	bar	5
Noise level
Less than	dB (A)	≤80
Control system
FANUC		0i-TF Plus
Net weight	kg	3200
Slant angle, Material	°	45°, HT300