Gantry Type Machining Center Gmf2014 CNC Gantry Milling Machine

• Customization: Available
• After-sales Service: 1
• Warranty: 1 Year
• Model NO.: GMF2014
• Process Usage: Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools
• Movement Method: Linear Control
• Control Method: Closed-Loop Control
• Numerical Control: CNC/MNC
• Processing Precision: 0.04~0.05(mm)
• Performance Classification: High-End CNC Machine Tools
• Certification: CE
• Condition: New
• Double Column CNC Machining Center: Gantry Milling Machine
• Machining Center: Double Column Machining Center
• Transport Package: Packing in Seaworthy Wooden Cases
• Specification: Worktable size: 3000/4000/5000/6000 x 2300
• Trademark: DRC
• Origin: China
• Production Capacity: 500

Product Description

Gantry Type Machining Center GMF2014 cnc Gantry Milling Machine

Gantry Type Machining Center GMF2014 cnc Gantry Milling Machine Gantry Type Milling Machine Machining Center
Installation conditions
1. Temperature In order to keep the machine tool processing accuracy within the standard value range, it is necessary to ensure that the working environment temperature is 17°C ~ 25°C, and the temperature change for 24 hours a day should be kept within ±2°C. If the accuracy of the parts being processed is lower than the factory accuracy of the machine tool, the ambient temperature range can be relaxed to 10°C~38°C.
2. Humidity Continuous: Below 75% (no condensation) Short time: 95% or less (no condensation)
3. Altitude Below 1000m
4. Installation site conditions The equipment installation site should be away from direct sunlight, vibration sources and heat sources, as well as high-frequency generators, welding machines, etc., to avoid machine tool production failures or loss of machine tool accuracy.
5. Air source requirements Air source pressure ≥0.6Mpa, filtration accuracy 100μm. In order to ensure the normal working performance of the equipment, if the compressed air source cannot meet the air source requirements, an air source purification device (dehumidification, oil removal, filtration) should be added before the machine tool air intake.
6. Power supply 3-phase 380V±10%; 50H Z        
If the voltage in the area where it is used is unstable, the machine tool should be equipped with a regulated power supply to ensure the normal operation of the machine tool.      
Regular work
7. Power source capacity        55KVA
8. Grounding Good grounding is required. It is recommended that each machine tool be grounded separately. The grounding wire should be a copper wire. The wire diameter should not be less than 10mm2 and the grounding resistance should be less than 4 ohms.

Widely used in the aviation, auto, precision molding industries. GMF series can provide a high-performance mechanical system and a software interface which can be operated easily. This provides multiple choices of multiple choices that will allow you to fully realize the high precision drea  

Model Item		RC2014
Work surface size (width × length) (mm)		1200×2100
Worktable movement direction stroke (X-axis mm)		2000
Spindle slide movement direction stroke (Y-axis mm)		1500(Tool changing stroke1600)
Spindle up and down movement direction stroke (Z axis mm)		800
Gantry width (mm)		1500
Gantry is too high (mm)		1030
Distance from spindle end face to work surface (mm)		150~950
Workbench T-slot (number - size × spacing)		7-22×170
Spindle specifications (model)		BT40
Spindle transmission mode	Belt	Rotation speed 8000r/min
		The standard pulley transmission ratio is 1.5:1; (optional 1:1)
	ZF reduction + belt (optional)	Rotation speed 8000r/min, transmission ratio 4:1;
	Gear head (Weimasi)	Maximum speed 8000r/min Transmission ratio 4.4:1
Rapid traverse feed speed (m/min)		15
Cutting feed rate (m/min)		10
X, Y, Z axis ball screw specifications/pitch		X:5010,Y:5010,Z:5010
X, Y, Z axis guide rail specifications/number of sliders		X-axis: roller guide 55/6; Y axis: roller guide 55/4; Z axis: rectangular slide rail
X, Y, Z axis servo motor transmission mode and transmission ratio		X, Y, Z axis direct connection
Spindle motor selection recommendations		22kW wide area motor
Recommended X, Y, Z three-phase servo motors		≥ X:38Nm;Y:30Nm;Z:30Nm(Brake))
Optical machine dimensions (length × width × height) (mm)		5600×2980×3190
Workbench load bearing (t)		3.5
The weight of the optical machine is about (t)		12

CNC Gantry Machining Center_Double Column Milling Machine

StructureThe structure of machine tool is analyzed with ANSYS at all stages from foundation design to guarantee of high-speed and high-precision continuous machining. A simulation test for deformation produced when the center of machine tool bears load is conducted to guarantee excellent bending rigidity of machine tool.