Ht10 Brilliant Quality Taiwan CNC Large Supply Gear Heavy Cutting 3 Axis Lathe Drill Mill Combo Lathe Machine

• After-sales Service: 1
• Warranty: 1
• Type: Horizontal Lathe
• Processing Accessory: Chuck CNC Lathe
• Guide Rail: Inclined Guide Rail
• Tool Holder: Single-tool Holder CNC Lathe
• Model NO.: HT10
• Power Source: Hydraulic Pressure
• Controlling Mode: CNC
• Automatic Grade: Automatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: CE
• Condition: New
• Transport Package: Packing in Seaworthy Wooden Cases
• Specification: Dimension(L*W*H): 3900/ 1900/2050mm
• Trademark: DRC
• Origin: China
• Production Capacity: 500

Product Description

HT10 Brilliant Quality Taiwan CNC Large Supply Gear Heavy Cutting 3 axis Lathe Drill Mill Combo Lathe Machine

IHT series Tuning machine with FANUC control system, Included Standard Equipment and Standard Control System Functions. Integrally molded low center of gravity casting bed, 30 ° saddle through optimized design, It has a large shock damping and a smaller amount of deformation, the main axle box, turret. Providing high-rigidity structure basis. 30 ° slant bed design to facilitate the operator upper and lower parts, but also to ensure. Smooth chip evacuation.

 

Overall:

The machine tool has a mechanical, electrical, and hydraulic integrated layout. The 45° overall slant bed has the advantages of compact structure, high rigidity, smooth chip removal, and convenient operation. The guide rail type is a rolling guide rail, and the driving parts are high-speed silent ball screws. It has the advantages of fast speed, less heat, and high positioning accuracy; the machine tool is fully enclosed protection, automatic chip removal, automatic lubrication, automatic cooling.

Spindle:

The main drive unit of this machine tool is driven by Japanese FANUC 11/15kw high-performance servo motor, which drives the spindle to rotate through a pair of pulleys. The spindle speed range is 30-4500r/min. The front support of the main shaft adopts three-set high-precision angular contact ball bearings, and the rear support adopts two high-precision angular contact ball bearings with large apertures to meet the bearing requirements of axial and radial cutting forces.

Tailstock:

The hydraulic cylinder is used to drive the integral mobile tailstock. The structure is simple, with high precision, high rigidity and reliable performance.

Turret:

The machine used servo power turret by SAUTER, with fast tool change speed and high reliability.

Drive:

The X-axis and Z-axis driving adopts FANUC high-performance servo motor, with high positioning accuracy and flexible and reliable action.

System:

The control system is FANUC 0iTF plus, using high-performance AC spindle motor and servo motor.

Main Drive Spindle Motor: Main drive system using FANUC/SIEMENS high performance servo spindle motor, through V-belt transimission power, to the patent design of high rigidity spindle structure with 3 angular contact ball bearings in front and 2 large aperture angular contact ball or roller(optional) bearings in rear side, to fulfil axial and radial cutting carrying requirements at same time.
Servo Tailstock: Substantially shorten un-processing time due to servo driven. high rigidity tailstock. Less operation steps. Setup time: reduce 50%. Operation time: reduce 20%. Programe different pressure by codes
Sub Spindle: Built-in Motor Spindle : High Precesion: The bigger spindle bearings and the appropriate wide spacing between the guideways ensure that HT series machines by high accuracy and rigidity.
Iron Bed: High stability and perfect machining results thanks to the integrally molded massive hT300 cast iron bed.

Precision heavy cutting slant bed turning center Features: Thanks to intergrated into machine CNC control, programming setup is direct and simpler. Automatic truss delivery system with 3 jaws clamping grapper and rotating cylinder. Optimized housing simplified equip ment maintenance. Linear robot system with high speed high precesion gear rack struc-ture. Telescop arm optional ready for low workshop roof endusers. Work piece measuring system tool measuring system. All new overall outlook design style.

Automatic truss delivery system optional for all HT series machine models Developed automatic truss delivery system based on HT series, is specially designed for HT models. DRC Machinery provides one-stop service of complete intergrated system including turning center and automation system. Therfore machines and automatic system only need one control system to manage all jobs. This helps maintain and operate the whole system more easier. Up to 6 KGs work piece loading capacity, faster, simpler to operator and more flexible. Maximum availbale work piece size is p200*150mm.

 

Technical date
Spindle head		FL220 h5
Spindle maximum speed	Type	3000
Max. Torque	N×m	420
Spindle power	Kw	15-18.5
Chuck diameter	mm	250
Spindle bore	mm	102
Front bearing diameter	mm	140
Spindle bearing lubrication	Type	Grease
Linear motion lubrication	Type	Oil
Speed range	rpm	5-3000
Work area
Maximum swing over bed	mm	680
Maximum cutting diameter	mm	500
Maximum cutting length	mm	1000
Maximum bar capacity	mm	75
Travel of Z-axis/X-axis	mm	1050/300
Ball screw
X/Z axis ballscrew DxP	mm	40 x 10
Feed
Rapid traverse Z/X	m/min	30/30
Feed force
Feed force X/Z : 7500 N m	Number of axis : 2
Measuring system
X/ Z axis measuring system : Absolute rotative
(X / Z);VDI/DGQ 3441 Positioning	mm	0.008/0.01
(X / Z);VDI/DGQ 3441 Repeatability	mm	0.005/0.008
Tool attachments
Servo turret : SAUTER	No. of tool stations : 12
OD tool size : 25/40 mm
Electrical specifications
Voltage : 380 ±10% V	Frequency : 50 ± 1% Hz
400v lie protection fuses : 100 A	Max. installed power : 50 KVA
Connection cables section : 4 x 10 mm2
Hydraulic unit
Max. working pressure :50  bar	Reservoir capacity : 35 l
Pump flow	I/ in	24
Oil-based coolant system
Capacity with tank : 180 l	Pump delivery : 30 l /min
Pump pressure	bar	5
Noise level
Less than	dB (A)	≤80
FANUC Control system		0iTF plus
Net weight	kg	About 7500
Slant angle, Material	-	45°, castiron